Payment & Shipping Terms:
|Operating Voltage:||220V,50HZ,customized||Standing:||Floor Standing|
|Model Type:||Movin Spot Cooling||Feature:||Portable Specialty Cooler|
|Cooling Capacity:||3500w||Size:||450 * 510 * 1100|
WX35 is the original spot cooler. It has no special power requirement so WX35 can be rolled into any room and it's instantly ready to cool the hottest spot. By cooling only the area that needs it, WX35 saves you money while protecting people and equipment and speeding up processes. Self-contained and portable, the WX35 requires little or no installation - simply roll it in, plug it in and turn it on.
These spot cooler air conditioners are preferred because of their convenience and efficiency -- no water lines need to be introduced in the desired room. Our portable air conditioners use ambient air in the surrounding environment so they don’t need any kind of special intake system to operate. Industrial air coolers created from the refrigeration process is exhausted off the top of the unit and can be ducted into the ceiling plenum or directed out the nearest door or window to exit the room or space.
The air-tight motor does not let any dust or moisture in, preventing motor malfunction.
Low power consumption
This model give it a very low operational cost.
Low noise design.
New technology gives premium performance with very low noise. 2dB lower than the previous model.
Very space efficient.
This mobile air conditioner can be placed directly against the wall on three sides, making it suitable for even the most cramped work places.
Helps cooling a larger area and creates a more pleasant and smooth temperature transition.
Easy to move.
Equipped with casters and caster stoppers for easy movement and safety during operation.
1. Full intelligent control, humidity adjustable.
2. Embedded portable cover plate, easy to repair and clean, can be artificially added water
3. Dry and wet separation design, independent electronic control system, operation is more secure and reliable.
4. Humidity control, timing control, switch control can be chosen in a variety of ways.
5. The machine adopts the anti-burn and anti-corrosion design, which is very sage and durable.
|Size||450 * 510 *1100mm|
1. Wherever our customers, sales associates and suppliers come into contact with us, we try to make the dialogue pleasant and profitable for both sides.
2. open ear for questions or problems.
3. Short delivery times for machinery, spares and wear parts.
4. Friendly competent staff.
5. Fair pricing.
There are two filters in the unit. The evaporator filter is located at the front of the unit. The condenser filter is located at the side of the unit.
1. loosen up 2 bolts on the front fi lter guard.
2. Slide f lter up and use a vacuum cleaner to remove the dust from the filter.
3. If the filter is heavily covered with dust and dirt, warm water and mild soap or neutral detergent may be used to wash the filter. Do not use any other chemicals to clean fi lter, as they will likely damage the fi lter.
4. Dry the filter in a shaded area before replacing it. Do not operate the unit without the fi lter installed and the filter guard in the closed position.
5. To clean the condenser fi lter, lift up on the side fi lter from the middle bar slightly and then angle the fi lter outwards from the bottom and remove.
1. Loosen up 2 bolts on the front filter guard.
2. Slide filter up and use a vacuum cleaner to remove the dust from the filter.
3. Remove dust from the filter using a vacuum cleaner hose aachment.
4. If required wash the filter in lukewarm water with a mild detergent. Leave to dry in a shaded area before reinstalling.
Contact Person: wang