Payment & Shipping Terms:
|Cooling Ability:||18700BTU||Benefits:||Emergency Instant|
|Type:||Inexpensive Cooling||Usage Square:||20sqm|
|Feature:||Temporary Air Cooling||Refrigerant Gas:||R410A|
With a 15 litre water tank capacity and 2 fan speed control options, our 5.5 kW Spot Cooler is perfect for both industrial and commercial use including server rooms, warehouses, retail outlets, offices, factories and print rooms to name a few.
The unit can cool areas up to 45 square metres when in room/area mode and can also be used as an effective spot cooler. Thermostatically controlled, you have complete control over the temperature.
Featuring aluminium mesh filters for easy cleaning, the unit also comes with an extendable exhaust duct, reaching up to 9m when fully extended.
With the option of low or high pressure and two flexible directional cold air outlet ducts, you really do get the cooling where you need it most
Cooling Setup: Bring timely & quickly cooling to building occupants when the central HVAC system is turned off.
Dehumidifying Setup: Effective water-damage restoration begins with Weixuan. Dry rooms out quickly to reduce the formation of mold and mildew, and keep them from spreading further. A Weixuan portable unit ensures substantially faster recovery than with fans or dehumidifiers, reducing restoration costs.
Best of all, installation is simple. Just roll the unit in, plug it in, attach the dry-air exhaust duct and turn the unit on. Right away it starts doing its job. You'll save time and money thanks to the new dehumidification technology, which is designed to remove moisture and replace it with dry air. Our machine is the perfect solution for protecting valuable equipment and property from moisture damage.
|Usage square meter||20sqm|
WARNINGS REGARDING PROPER LOCATION FOR INSTALLATION
Do not use the unit in explosive environments or in areas where flammable gas leakage may occur. Do not use the unit in areas where it will be exposed to rain or water. Do not use the unit in a corrosive atmosphere. Do not use the unit above 18°C(64°F) ~ 45°C(113°F). Do not install the unit on uneven or sloping surface. The unit may roll or topple over even if the casters are set to the locked posiƟ on.
MOVING THE UNIT
Unlock the casters and push the unit using the side handles to a flat, level surface and set the caster brakes to the locked position.
PLUGGING IN THE UNIT
Check the prongs and surface of the power cord plug for dust/dirt. If dust and/or dirt are present, wipe off with a clean, dry cloth. Check the power cord, plug and prongs for damage or excess play. If any damage or excess play is found, contact a qualified repair technician or a qualifi ed electrician to perform replacement or repair of the power cord, plug or prongs. NOTE: Make sure the AC outlet is free of dirt, dust, oil, water, or any other foreign material. The unit is equipped with an approved NEMA plug confi guration. The appropriate outlet must be used for each plug type.
Contact Person: wang